APRILIA ETV 1000 CAPONORD

TECHNICAL CHART

Photographs, technical data, specifications and colours refer to the Italian market version and may be subject to change without prior notice. For detailed information on the technical characteristics of the vehicle sold in your country, contact an Aprilia dealer

Engine
Longitudinal 60° V twin four stroke, with patented AVDC system (Anti-Vibration Double Countershaft).

Fuel
95 RON unleaded petrol.

Cooling
Liquid cooling with three-way pressurised circuit.

Bore and stroke
97 x 67.5 mm.

Total displacement
998 cc.

Compression ratio
10.4:1.

Valve gear
Double overhead cam with mixed gear/chain timing drive, four valves per cylinder.

Maximum power at crankshaft
98 HP (72 kW) at 8.500 r.p.m..

Maximum torque at crankshaft
9.20 kgm (90 Nm) at 6.250 r.p.m..

Fuel injection
Integrated electronic engine management system. Indirect multi-point electronic injection.
Lambda probe oxygen sensor in exhaust system.
47 mm diameter throttle bodies.

Ignition
Digital electronic ignition with TSI (Twin Spark Ignition) with two spark plugs per cylinder. Ignition timing integrated in the injection control system. DIAC (Dynamic Ignition Advance Control) electronically controlled ignition timing.

StartingElectric starter.

Lubrication
Dry sump with separate oil reservoir.
Double trochoidal pump with oil cooler.
Primary driveSpur gears. Transmission ratio: 60/31 (1.935)

Gearbox
6 speed. Transmission ratios:
1st 35/14 (2.5)
2nd 28/16 (1.75)
3rd 26/19 (1.368)
4th 24/22 (1.091)
5th 22/23 (0.957)
6th 23/27 (0.852)

Final drive
525 x-ring chain.
Transmission ratio: 45/17.

Clutch
Multiple disk in oil bath with patented PPC power-assisted hydraulic control. Freudenberg clutch line.
ExhaustEuro 3
Frame
Double Wave Twin Beam frame in aluminium-magnesium alloy.
Removable high strength steel seat mount frame.
Dimensions
Maximum length: 2,290 mm
Maximum width: 876 mm (at handlebars)
Maximum height: 1,436 mm (at windshield)
Seat height: 820 mm
Handlebar height: 1,115 mm
Wheelbase: 1,544 mm
Trail: 129 mm
Steering angle: 27.9°

Front suspension
Marzocchi 50 mm hydraulic fork.
Wheel travel 175 mm.

Rear suspension
Aluminium alloy swingarm. Rising rate linkage with APS (Aprilia Progressive System).
Sachs hydraulic monoshock with adjustable rebound and spring preload (12 mm).
Wheel travel 185 mm.

BRAKING SYSTEM
Standard version
Front: Two Brembo 300 mm stainless steel semi-floating disks.
Floating callipers with differential diameter 32 and 30 mm pistons. Semi-metallic pads.
Rear: Brembo 272 mm stainless steel disk. Calliper with two 34 mm pistons.
ABS version
Control unit: Brembo/Bosch ABS 5M with two Bosch DF11 sensors.
Front: Two Brembo 300 mm stainless steel semi-floating disks.
Floating callipers with differential diameter 32 and 30 mm pistons. Semi-metallic pads.
Rear: 272 mm stainless steel disk. Calliper with two 34 mm pistons.
BH DOT flexible brake hoses with metal braid outers and PTFE inners combined with rigid steel pipe.

Wheels
Patented spoked wheels for tubeless tyres.
Front: 2.50 X 19".
Rear: 4.00 X 17".
Tyres:
Tubeless radial.
Front: 110 / 80 VR 19.
Rear: 150 / 70 VR 17.
Electrical system 12 V.
Battery 12V 12Ah.
Alternator 470 W.
Tank Capacity 25 litres, 5 litre reserve.